There are 173 products.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
RTV (Room Temperature Vulcanization) silicone for low melting metal casting. Recommended for casting lead and tin or bismuth alloys. ShoreA60
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects
Polyester gel-coat with paraffin (Top-Coat), for brush or roller application. Isophthalic For repairs and molds. Select Format and Color.
RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.
_x000D_
NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Buy the Liquid of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.
Polyester Gelcoat, for application Brush or roller. Isophthalic Base Viscosity appropriate for all types of molds and resin parts. Select the format and color.
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.
TWILL or SARGA fabric of 165 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.
The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant
Buy here the base of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results. Select the size according to your need
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
Transparent epoxy resin. Low viscosity and adherence to pieces of jewelry. It has very good UV stability.
