Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.

Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works

Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.

Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.

Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"

Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.

TWILL or SARGA fabric of 290 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin

Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.

Polyester putty in 2 kg format, to refine details, rectify molds and repair fiberglass laminates with resin. Easily sandpaper Format 2 kg (includes catalyst)

210 gr / m2 flat fabric Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin

Innovative modeling paste and suitable for any application. Format 1 Kg.

Important note: These molding pastes never dry, thanks to their high wax and oil content.

Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.

HEXCEL PLAIN fabric of 206 gr / m2 (6 Ounces) Format: 1 ML (650mm width) ideal for work with polyester resin or epoxy resin

Flat fabric of 163 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin

200gr / m2 twill 3K carbon fiber fabric

Liquid for making a non-stick film between the mold and the reproductions. Ideal as a complement to the mold wax.

Silicone catalyst for RTV molds, with blue pigment or without as an indicator of homogeneous mixing w

Innovative modeling paste and suitable for any application. Format 1 Kg.

Important note: These molding pastes never dry, thanks to their high wax and oil content.

Release agent in spray bottle. Suitable for polyester, epoxy resins, PMMA and polyurethanes.

500gr / m2 Roving fiberglass fabric Format 1m2 (125x80cm) ideal for work with polyester resin or epoxy resin

Brush with wooden handle for all types of work with polyester resins, acrylic resins and paints._x000D_ _x000D_ Format: 1 unit

150gr / m2 absorption blanket

Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.