There are 173 products.
Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins
Styrene Monomer 1 liter, solvent for polyester resins and gel-coats. to modify viscosity or general cleaning.
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
Buy the Jesmonite AC300 resin liquid separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability
Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
disposable cuvette cover for 22 cm cuvette
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
complex 1,5m x 100m_x000D_ _x000D_ the COMPLEX mesh integrates the drainage mesh, the perforated film and even the Peel Ply, and saves time, resin and effort in separating the consumables from the finished piece.
Pack that includes everything you need to start working with JESMONITE AC100:
-2 KITS OF 3.5 AC100
-MIXING BLADE
-1 PIGMENT OF 50GR
-1 THIXOTROPIC OF 50GR
-1M² QUADRIAXIAL FIBER GLASS
-100GR GLASS FIBER CHOPPED STRANDS
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
Useful part to divide the resin distribution circuit in the infusion
Oval silicone mold 17.5 cm long and 9 cm wide
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Metal roller with parallel grooves, for deaerated work with composites, application of polyester resin and fiberglass or carbon / epoxy
3K carbon fiber fabric of 200gr / m2
Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.
mesh tube mesh Yb1 infusion input
TWILL or SARGA fabric of 290 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
