List of products by brand Resineco

To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.

The key that allows to open and close the vacuum circuit in the infusion

Low density polyethylene spiral, for resin distribution in an infusion system.

Pyramid for infusion, for 12 mm hose To connect the distribution system with a resin inlet and outlet hose. Made of high density polyethylene.,

Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2

200gr / m2 twill 3K carbon fiber fabric

Polyester putty, to refine details, rectify molds and repair fiberglass laminates with resin. 330 gr format

3K carbon fiber fabric of 200gr / m2

Abrasive nylon fiber wheel for sanding jesmonite metal surfaces. It can be used on flat and irregular interior surfaces. 6mm shank Compatible with most electric drills.

150gr / m2 absorption blanket

Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.

Pure Acetone is used to clean tools and spots of resin of polyester or epoxi and gel-coats

Acrylic sealant GLOSS for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"

Central control unit to connect the vacuum gauge, stopcocks or outputs

Painter roller, standard, to apply all kinds of resins. Diameter 50mm, width 22cm

Resin application kit, either polyester, epoxy or jesmonite that includes:

Biaxial fiberglass fabric +/- 45º Format: 1 M2 (width 1250mm) ideal for works with polyester resin or epoxy resin

Fiberglass braid 32 mm, 300tex, 68 gr/meter.