BLACK DRAIN MESH 150GR 150CM M2

Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2

mesh tube mesh Yb1 infusion input

Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_

The easiest and most economical solution to have an effective resin trap

Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.

complex 1,5m x 100m_x000D_ _x000D_ the COMPLEX mesh integrates the drainage mesh, the perforated film and even the Peel Ply, and saves time, resin and effort in separating the consumables from the finished piece.

Low density polyethylene spiral, for resin distribution in an infusion system.

Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works

Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.

Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.

10X12MM 60ºC infusion hose

Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.

SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.

SORIC SF-2 MM

Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.