Vacuum process

Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)

Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works

Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_

150gr / m2 absorption blanket

Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.

Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.

Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.

Low density polyethylene spiral, for resin distribution in an infusion system.

10X12MM 60ºC infusion hose

Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability

Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.

Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.