Jesmonite AC200 shares all the same attributes as AC100, however it is designed as a casting or coating compound that can be carved after it has set. AC200 can be cast into a range of moulding compounds, and the resulting material displays remarkable carving and machining properties.
It has excellent adhesive properties allowing thick layers to be built up onto many substrates such as carved foams and then re-worked to produce fine detail. It is also possible to put a durable hard coat of AC100 over the carved surface or object if required.
AC200 is supplied in separate containers of liquid and powder, and is mixed at a ratio of 2 parts AC200 powder to 1 part AC200 liquid by weight. It is also fully compatible with the Jesmonite range of ancillary products including Pigments, Glass Reinforcements, & Thixotrope.
There are 4 products.
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Buy the base of the Jesmonite AC200 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
Buy the Jesmonite A200 resin liquid separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results
