Our own brand, selected products
Under the Resineco brand, you can find a selection of polyester, epoxy, fiber resins ...
There are 140 products.
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
Polyester Gelcoat, for application Brush or roller. Isophthalic Base Viscosity appropriate for all types of molds and resin parts. Select the format and color.
Empty pump for composites 42L / MIN 15 micron. Mini high performance vacuum pump. Maximum vacuum of 15 micron with a capacity of 42 liters per minute, ideal for small and medium pieces, up to 2m2
Metal roller with parallel grooves, for deaerated work with composites, application of polyester resin and fiberglass or carbon / epoxy
Metal roller for fiberglass application manually (SPECIAL CORNERS), allows to easily extract air bubbles that can remain between layers as well as make more pressure and eliminate excess resin.
Innovative modeling paste and suitable for any application. Format 1 Kg.
Important note: These molding pastes never dry, thanks to their high wax and oil content.
TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections
Polyester gel-coat with paraffin (Top-Coat), for brush or roller application. Isophthalic For repairs and molds. Select Format and Color.
RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.
_x000D_
NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD
Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.
Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.
Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects
Transparent epoxy resin. Low viscosity and adherence to pieces of jewelry. It has very good UV stability.
Removable glass / carbon fiber sealant. It does not affect the mechanical properties of the infused piece
