List of products by brand Resineco

Brush with wooden handle for all types of work with polyester resins, acrylic resins and paints._x000D_ _x000D_ Format: 1 unit

Innovative modeling paste and suitable for any application. Format 1 Kg.

Important note: These molding pastes never dry, thanks to their high wax and oil content.

Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2

Release agent to remove your polyester, jesmonite or epoxy parts in an easy way

weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.

RTV (Room Temperature Vulcanization) silicone for low melting metal casting. Recommended for casting lead and tin or bismuth alloys. ShoreA60

Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.

Release agent in spray bottle. Suitable for polyester, epoxy resins, PMMA and polyurethanes.

Painter roller, standard, to apply all kinds of resins. Diameter 50mm, width 22cm

Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.

Brush with wooden handle for all types of work with polyester resins, acrylic resins and paints._x000D_ _x000D_ Format: 1 unit

Professional modeling paste for the modeling industry. (automotive, design, stop-motion cinema) High quality paste for manual or tool modeling. Gray. Format 1 Kg.

The easiest and most economical solution to have an effective resin trap

Gelcoat ISO / NPG specific for molds of great detail and durability

Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.

Rhodiasolv RPDE solvent is a resin cleaning agent that can replace Acetone and other irritating chemicals. It does not serve to dilute, just to clean. It is very efficient since it does not evaporate.

Liquid for making a non-stick film between the mold and the reproductions. Ideal as a complement to the mold wax.

Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy

Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.