Our own brand, selected products
Under the Resineco brand, you can find a selection of polyester, epoxy, fiber resins ...
There are 141 products.
Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
ACCELERATE THE COPPER, BRONZE OR BRASS OXIDATION PROCESS._x000D_ Water-based acid solution that is applied to Metal to accelerate oxidation.
Epoxy resin with Bio Mass 55% Replaces the consumption of mineral resources by plant resources
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.
mesh tube mesh Yb1 infusion input
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Elasticity and touch. Format: Box of 100 units. Natural color
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
The easiest and most economical solution to have an effective resin trap
Innovative modeling paste and suitable for any application. Format 1 Kg.
Important note: These molding pastes never dry, thanks to their high wax and oil content.
Innovative modeling paste and suitable for any application. Format 1 Kg.
Important note: These molding pastes never dry, thanks to their high wax and oil content.
Professional modeling paste for the modeling industry. (automotive, design, stop-motion cinema) High quality paste for manual or tool modeling. Gray. Format 1 Kg.
Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Useful part to divide the resin distribution circuit in the infusion
Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.
Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.
Polyester Gelcoat, for application Brush or roller. Isophthalic Base Viscosity appropriate for all types of molds and resin parts. Select the format and color.
Polyester putty with fiberglass. Ideal for reinforcing laminates or making structural repairs that require good resistance
Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.
