List of products by brand Resineco

Fiberglass braid 32 mm, 300tex, 68 gr/meter.

Low density polyethylene spiral, for resin distribution in an infusion system.

Polyester putty spatulas, 4 units, stainless steel

Abrasive nylon fiber wheel for sanding jesmonite metal surfaces. It can be used on flat and irregular interior surfaces. 6mm shank Compatible with most electric drills.

10X12MM 60ºC infusion hose

Unidirectional carbon fiber fabric of 125gr / ml

ACCELERATE THE COPPER, BRONZE OR BRASS OXIDATION PROCESS._x000D_ Water-based acid solution that is applied to Metal to accelerate oxidation.

Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.

CONSUMABLES KIT SP (ANCILLARY KIT)

Unidirectional carbon fiber fabric of 200gr / ml

3K carbon fiber fabric of 200gr / m2

Flexible polyester resin, with low reactivity and medium viscosity, for blends with standard resin and flexible polyester resins.

200gr / m2 twill 3K carbon fiber fabric

Styrene Monomer 1 liter, solvent for polyester resins and gel-coats. to modify viscosity or general cleaning.

CARBON HYBRID FABRIC WITH ARAMIDA 73210 SARGA 2x2 210GR / M2 x 122CM K58170

Transparent resin for surfboards. Medium viscosity and fast cure. Specific for surfboards and nautical. Very fast drying, good UV resistance.

200gr / m2 fiberglass tape. width 5 cm Sales unit 1 linear meter. (the continuous meters of the same coil are cut)

160gr / m2 fiberglass tape. width 10 cm Sales unit 1 linear meter. (the continuous meters of the same coil are cut)

TWILL or SARGA fabric of 290 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin