In RESINECO we have the priority to offer products of the best quality and with innovative elements in terms of safety and ease of use. In this section you can find polyester resin with special characteristics that make it different from those that are easier to find in the market.
We emphasize the ADHyECO orthophthalic polyester resin that contains a paraffin that blocks the emission of styrene vapors without limiting its interlaminar adhesion.
We have recently added to our range transparent polyester resin or glass for castings, casting polyester resin without pre-accelerate to control the temperature of curing of different sizes of castings and a polyester resin for flexible lamination that allows to manufacture large laminates with fiber of glass without expansion joint (special for swimming pools and terraces)
In this way you gain in comfort and lower the security requirements of the facilities in which it is used.
We also have resins that contain monomers other than styrene and make it easier to apply them on materials that traditional polyester resins attack and make their application impossible. The best example is polyester resin for POREX.
If you need Gelcoats or brush or gun Topcoats we have a color chart at your disposal.
There are 28 products.
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects
Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Polyester putty, to refine details, rectify molds and repair fiberglass laminates with resin. 330 gr format
Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.
Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.
Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.
Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.
Polyester putty in 2 kg format, to refine details, rectify molds and repair fiberglass laminates with resin. Easily sandpaper Format 2 kg (includes catalyst)
Resin application kit, either polyester, epoxy or jesmonite that includes:
Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!
Perfect for use with JESMONITE AC100
Size 30gr
Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Transparent resin for surfboards. Medium viscosity and fast cure. Specific for surfboards and nautical. Very fast drying, good UV resistance.
Polyester putty with fiberglass. Ideal for reinforcing laminates or making structural repairs that require good resistance
Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. get an elegant and eye-catching final result!
Perfect for use with JESMONITE AC100
Format 5 gr
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
Polyester putty spatulas, 4 units, stainless steel
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
