Polyester resins require additives for curing properly. Apart from the essential catalyst of MEK Peroxide, in this section you can find:
Promoter: to reduce the working time and curing the resin
Retardant: to extend the working time of the resin.
Flexible resin, to mix with any polyester and achieve greater tenacity and strength.
Thickening: Aerosil to increase viscosity
Styrene and Paraffin Styrene: to lower the viscosity and eliminate the superficial tacky
There are 10 products.
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.
Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
CONSUMABLES KIT SP (ANCILLARY KIT)
Flexible polyester resin, with low reactivity and medium viscosity, for blends with standard resin and flexible polyester resins.
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.
Styrene Monomer 1 liter, solvent for polyester resins and gel-coats. to modify viscosity or general cleaning.
Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.
