Silicone for molds with a characteristic red color that gives it a special load that gives it very high properties in relation to resistance to high temperatures. This property makes it an ideal silicone for molds where you need to apply metals of the low melting point category (max 350ºC). Lead, Pewter,...
There are 4 products.
RTV (Room Temperature Vulcanization) silicone for low melting metal casting. Recommended for casting lead and tin or bismuth alloys. ShoreA60
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
